How To Hard Reset / Factory Reset Samsung Galaxy Note 10.1 - 2014 Edition SM-P600 - Key Combination Method

The Hard Reset / Factory Reset operation can fix many software related errors and problems:
- After installing bad or unsupported application into your Samsung mobile phone which causes your phone to be frozen.
- Your Samsung mobile phone doesn't respond to any order after booting because of some software errors.
- Forgotten pattern lock in Samsung Android mobile phones.
- Forgotten user code.
- Forgotten phone code.
- Before or after installing new firmware updates into your device.
- Before selling the device to Wipe all your saved data.

Before performing the Hard Reset:
- In case your Samsung mobile phone can connect to a computer then it is better to make a backup of your saved data using Samsung kies software.
- But in case that is not possible then you can check that your phone's battery has enough charging, Otherwise you should charge it.

Samsung Galaxy Note 10.1 - 2014 Edition SM-P600 Hard Reset Steps:

- Turn Off your Samsung Galaxy Note 10.1 device.

- Wait for 10 seconds, Then move to the next step.

- Press and hold Volume Up key + Power key.

- Keep pressing the above keys until the Samsung Logo appears,Then release Power key only.

- When you see Factory reset / System Recovery menu on screen release the Volume Up Key.

- Use Volume Down key to select Wipe Data / Factory Reset option.

- Use Power key to confirm the operation.

- You need to use the Volume Down key again to select "Yes -- delete all user data"

- Use Power key to confirm.

- After performing the hard reset, Select Reboot System Now option, And confirm it using Power key.

- Now the phone will reboots, Wait for it to be fully on and then you can start using it.

Notice: The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.

How To Manually Update Samsung Galaxy S4 Active SGH-I537 Firmware Using Odin3 Flasher

Main Specifications of Samsung Galaxy S4 Active SGH-I537:

- Android 4.2.2 Jelly Bean OS.
- Support 2G, 3G, And 4G Networks.
- TFT capacitive touchscreen, 16M colors, 1080 x 1920 pixels, 5.0 inches.
- Corning Gorilla Glass 2 Protection.
- Memory: 16GB Internal memory, microSD Up to 64GB.
- RAM: 2GB RAM memory.
- Camera: Main 8 MP, 3264 x 2448 pixels camera, And 2 MP secondary one.
- CPU: Quad-core 1.9 GHz Krait 300, Qualcomm APQ8064T Snapdragon 600.
- GPU: Adreno 320.
- Wi-Fi 802.11 a/b/g/n/ac, Dual-Band, Wi-Fi Direct, DLNA, Wi-Fi Hotspot.
- Bluetooth v4.0
- TV-out (via MHL 2 A/V link).
- NFC and GPS.
- Battery: Li-Ion 2600 mAh

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung Galaxy S4 Active SGH-I537 Firmware:
- Samsung Galaxy S4 Active SGH-I537 Stock Firmware Package.
- Odin3 Flasher.
- Samsung Galaxy S4 Active SGH-I537 USB Drivers.

Needed Tools For Updating Samsung Galaxy S4 Active SGH-I537 Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung Galaxy S4 Active SGH-I537 Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: i537_CSB_signed_jactive_att.pit

- Firmware files selection:

Click Bootloader button to select: BOOTLOADER_I537xxxxxxx_...user_low_ship_MULTI_CERT.tar.md5
Click PDA button to select: PLATFORM_I537xxxxxxx_..._user_low_ship_MULTI_CERT.tar.md5
Click Phone button to select: MODEM_I537xxxxxxx_..._user_low_ship_MULTI_CERT.tar.md5
Click CSC button to select: CSC_Xxx_I537xxxxxxx_..._user_low_ship_MULTI_CERT.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notice: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

How To Root Samsung Galaxy Note 10.1 GT-N8000 and GT-N8010 Using CF-Auto-Root Method

What is Android Rooting: According to Wikipedia the Android Rooting means "the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem."

The Benefits of Rooting:
- Installing application that requires special access to some system files.
- Flashing custom Roms and Kernels instead of Stock Roms.
- Delete or modify some system files.
- Activating some hidden features.
- Repair IMEI.
- Unlocking your device via special hardware tools.

Disclaimer: Keep in mind that you are applying the root operation on your own responsibility.

Basic Steps:
- Backup any wanted data before starting.
- Charge your device battery to be at least at 90% of charging level.
- Download and install The USB driver for your device, And it is better to restart the computer after that.
- Check the installed firmware version via this code *#1234# and write it down.

Downloads:
- N8000 / N8010 CF-Auto-Root File: Select the GT-N8000 or GT-N8010 CF-Auto-Root file, According to your device model.
- Odin3 Flasher.

Samsung Galaxy Note 10.1 N8000 / N8010 Rooting Steps:
- After downloading the CF-Auto-Root-...-gtn8000.zip (CF-Auto-Root-...-gtn8010.zip) unzip it.

- Run Odin3.exe Flasher.

- Make sure that Re-Partition option is not checked.

- Click on PDA button and select the CF-Auto-Root-....tar.md5 file from the extracted folder.

- Turn off your Galaxy Note 10.1.

- Put the device into Download Mode ( Volume Down + Power, Then Volume Up key).

- Connect your Galaxy Note 10.1 to Computer using the USB cable.

- Wait until Odin3 flasher detects the device, It should detect its COM port number.

- Click on Start button.

- Odin3 flasher will install the CF-Auto-Root file and reboots your device into special Recovery Mode.

- Some auto jobs will be done, So wait for it, The device will be rebooted after all jobs were done.

How To Root Samsung Galaxy Note 3 SM-N900 And SM-N9005 Using CF-Auto-Root Method

What is Android Rooting: According to Wikipedia the Android Rooting means "the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem."

The Benefits of Rooting:
- Installing application that requires special access to some system files.
- Flashing custom Roms and Kernels instead of Stock Roms.
- Delete or modify some system files.
- Activating some hidden features.
- Repair IMEI.
- Unlocking your device via special hardware tools.

Disclaimer: Keep in mind that you are applying the root operation on your own responsibility, Also you should know that rooting will trigger the KNOX warranty void status.

Basic Steps:
- Backup any wanted data before starting.
- Charge your device battery to be at least at 90% of charging level.
- Download and install The USB driver for your device, And it is better to restart the computer after that.
- Check the installed firmware version via this code *#1234# and write it down.

Downloads:
- N900 / N9005 CF-Auto-Root File: Select the SM-N900 or SM-N9005 CF-Auto-Root file, According to your device model.
- Odin3 Flasher.

Samsung Galaxy Note 3 SM-N900 And SM-N9005 Rooting Steps:
- After downloading the CF-Auto-Root-...-smn900.zip (CF-Auto-Root-...-smn9005.zip) unzip it.

- Run Odin3.exe Flasher.

- Make sure that Re-Partition option is not checked.

- Click on PDA button and select the CF-Auto-Root-....tar.md5 file from the extracted folder.

- Turn off your Samsung Galaxy Note 3 Device.

- Put the device into Download Mode ( Volume Down + Home + Power, Then Volume Up key).

- Connect your Galaxy Note 3 to Computer using the USB cable.

- Wait until Odin3 flasher detects the device, It should detect its COM port number.

- Click on Start button.

- Odin3 flasher will install the CF-Auto-Root file and reboots your device into special Recovery Mode.

- Some auto jobs will be done, So wait for it, The device will be rebooted after all jobs were done.

How To Hard Reset / Factory Reset Samsung Galaxy Ace II GT-I8160 - Key Combination Method

The Hard Reset / Factory Reset operation can fix many software related errors and problems:
- After installing bad or unsupported application into your Samsung mobile phone which causes your phone to be frozen.
- Your Samsung mobile phone doesn't respond to any order after booting because of some software errors.
- Forgotten pattern lock in Samsung Android mobile phones.
- Forgotten user code.
- Forgotten phone code.
- Before or after installing new firmware updates into your device.
- Before selling the device to Wipe all your saved data.

Before performing the Hard Reset:
- In case your Samsung mobile phone can connect to a computer then it is better to make a backup of your saved data using Samsung kies software.
- But in case that is not possible then you can check that your phone's battery has enough charging, Otherwise you should charge it.

Samsung Galaxy Ace II GT-I8160 Hard Reset Steps:

- Take out your phone's battery, SIM-card and memory card too.

- After 10 seconds put the battery back into your phone.

- Press and hold Volume Up key + Home key then press Power key.

- Keep pressing the above keys until Samsung logo appears,Then release all keys.

- You will get Factory reset / System Recovery menu on screen.

- Use Volume Down key to select Wipe Data / Factory Reset option.

- Use Home key to confirm the operation.

- You need to use the Volume Down key again to select "Yes -- delete all user data"

- Use Home key to confirm.

- After performing the hard reset, Select Reboot System Now option, And confirm it using Home key.

- Now the phone will reboots, Wait for it to be fully on and then you can start using it.

Notice: The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.

How To Update Samsung Galaxy S4 LTE-A GT-I9506 Firmware Version - Manual Update Method

What is Firmware Update Process and Why We Need it:
The Firmware Update process means that your device will get a newer software version or we can say it will run with a newer version of its Operating System, For example if your Samsung Android device is running Android version 4.0.4 and Samsung release Android 4.1.2 version, Then you need to perform a Firmware Update process to install the new version into your device.

Mostly the new Firmware version is released to fix some bugs or to add some new functions, And sometimes it is released to fix some security threats.

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung Galaxy S4 LTE-A GT-I9506 Firmware:
- Samsung I9506 Stock Firmware Package.
- Odin3 Flasher.
- Samsung USB Drivers.

Needed Tools For Updating Samsung Galaxy S4 LTE-A GT-I9506 Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung Galaxy S4 LTE-A GT-I9506 Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: signed_KS01LTE_EUR_16G_0606_hidden100M.pit

- Firmware files selection:

Click Bootloader button to select: BOOTLOADER_I9506xxxxxxx_...user_low_ship_....tar.md5
Click PDA button to select: CODE_I9506xxxxxxx_1414753_REV03_user_low_ship.tar.md5
Click Phone button to select: MODEM_I9506xxxxxxx_REV00_CL1249958.tar.md5
Click CSC button to select: CSC_Oxx_I9506xxxxxxx_1556917_REV03_user_low_ship.tar.md5
- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notice 1: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

Notice 2: In new Android Version like Android 4.3 Jelly Bean you will get new firmware files names, You will get CP, AP, And BL, And you have to use Odin3 v3.9 instead of v3.7, So CP = Modem, AP = Platform or CODE, BL = BOOTLOADER, And CSC = CSC.

How To Update Samsung Galaxy S4 DUOS GT-I9502 Firmware Version Using Odin3 Flasher

What is Firmware Update Process and Why We Need it:
The Firmware Update process means that your device will get a newer software version or we can say it will run with a newer version of its Operating System, For example if your Samsung Android device is running Android version 4.0.4 and Samsung release Android 4.1.2 version, Then you need to perform a Firmware Update process to install the new version into your device.

Mostly the new Firmware version is released to fix some bugs or to add some new functions, And sometimes it is released to fix some security threats.

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung Galaxy S4 DUOS GT-I9502 Firmware:
- Samsung GT-I9502 Stock Firmware Package.
- Odin3 Flasher.
- Samsung GT-I9502 USB Drivers.

Needed Tools For Updating Samsung Galaxy S4 DUOS GT-I9502 Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung Galaxy S4 DUOS GT-I9502 Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: adonis3gduos_chn_cu.pit

- Firmware files selection:

Click Bootloader button to select: BOOTLOADER_I9502xxxxxxx_...user_low_ship_....tar.md5
Click PDA button to select: CODE_I9502xxxxxxx_1414753_REV03_user_low_ship.tar.md5
Click Phone button to select: MODEM_I9502xxxxxxx_REV00_CL1249958.tar.md5
Click CSC button to select: CSC_Oxx_I9502xxxxxxx_1556917_REV03_user_low_ship.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notice 1: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

Notice 2: In new Android Version like Android 4.3 Jelly Bean you will get new firmware files names, You will get CP, AP, And BL, And you have to use Odin3 v3.9 instead of v3.7, So CP = Modem, AP = Platform or CODE, BL = BOOTLOADER, And CSC = CSC.

How To Root Samsung Galaxy Note 3 SM-N900 And SM-N9005 Using CF-Auto-Root Method

What is Android Rooting: According to Wikipedia the Android Rooting means "the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem."

The Benefits of Rooting:
- Installing application that requires special access to some system files.
- Flashing custom Roms and Kernels instead of Stock Roms.
- Delete or modify some system files.
- Activating some hidden features.
- Repair IMEI.
- Unlocking your device via special hardware tools.

Disclaimer: Keep in mind that you are applying the root operation on your own responsibility, Also you should know that rooting will trigger the KNOX warranty void status.

Basic Steps:
- Backup any wanted data before starting.
- Charge your device battery to be at least at 90% of charging level.
- Download and install The USB driver for your device, And it is better to restart the computer after that.
- Check the installed firmware version via this code *#1234# and write it down.

Downloads:
- N900 / N9005 CF-Auto-Root File: Select the SM-N900 or SM-N9005 CF-Auto-Root file, According to your device model.
- Odin3 Flasher.

Samsung Galaxy Note 3 SM-N900 And SM-N9005 Rooting Steps:
- After downloading the CF-Auto-Root-...-smn900.zip (CF-Auto-Root-...-smn9005.zip) unzip it.

- Run Odin3.exe Flasher.

- Make sure that Re-Partition option is not checked.

- Click on PDA button and select the CF-Auto-Root-....tar.md5 file from the extracted folder.

- Turn off your Samsung Galaxy Note 3 Device.

- Put the device into Download Mode ( Volume Down + Home + Power, Then Volume Up key).

- Connect your Galaxy Note 3 to Computer using the USB cable.

- Wait until Odin3 flasher detects the device, It should detect its COM port number.

- Click on Start button.

- Odin3 flasher will install the CF-Auto-Root file and reboots your device into special Recovery Mode.

- Some auto jobs will be done, So wait for it, The device will be rebooted after all jobs were done.

How To Update Samsung Galaxy Star Pro Duos GT-S7262 Firmware Version - Manual Update

What is Firmware Update Process and Why We Need it:
The Firmware Update process means that your device will get a newer software version or we can say it will run with a newer version of its Operating System, For example if your Samsung Android device is running Android version 4.0.4 and Samsung release Android 4.1.2 version, Then you need to perform a Firmware Update process to install the new version into your device.

Mostly the new Firmware version is released to fix some bugs or to add some new functions, And sometimes it is released to fix some security threats.

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung Galaxy Star Pro Duos GT-S7262 Firmware:
- Samsung GT-S7262 Stock Firmware Package.
- Odin3 Flasher.
- Samsung GT-S7262 USB Drivers.

Needed Tools For Updating Samsung Galaxy Star Pro Duos GT-S7262 Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung Galaxy Star Pro Duos GT-S7262 Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: logan2g.pit

- Firmware files selection:

Click Bootloader button to select: BOOTSPL_S7262xxxxxxx_..._REV00_user_low_ship.tar.md5
Click PDA button to select: CODE_S7262xxxxxxxx_..._REV00_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7262xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S7262Oxxxxxx_..._REV00_user_low_ship.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notice: When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

How To Update Samsung GT-S7582 Galaxy S DUOS 2 Firmware Version - Manual Update Guide

What is Firmware Update Process and Why We Need it:
The Firmware Update process means that your device will get a newer software version or we can say it will run with a newer version of its Operating System, For example if your Samsung Android device is running Android version 4.0.4 and Samsung release Android 4.1.2 version, Then you need to perform a Firmware Update process to install the new version into your device.

Mostly the new Firmware version is released to fix some bugs or to add some new functions, And sometimes it is released to fix some security threats.

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung GT-S7582 Galaxy S DUOS 2 Firmware:
- Samsung GT-S7582 Galaxy S DUOS 2 Stock Firmware Package.
- Odin3 Flasher.
- Samsung GT-S7582 Galaxy S DUOS 2 USB Drivers.

Needed Tools For Updating Samsung GT-S7582 Galaxy S DUOS 2 Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung GT-S7582 Galaxy S DUOS 2 Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: kyleprods.pit

- Firmware files selection:

Click Bootloader button to select: BOOT_S7582xxxxxxx_REV00.tar.md5
Click PDA button to select: CODE_S7582xxxxxxx_2099582_REV00_user_low_ship.tar.md5
Click Phone button to select: MODEM_S7582xxxxxxx_REV00.tar.md5
Click CSC button to select: CSC_Oxx_S7582xxxxxxx_2099582_REV00_user_low_ship.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notices:

- When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

- In new Odin3 flasher versions you will get BL, AP, CP, CSC instead of the old versions button's name, So BL = Bootloader, CP = PDA, CP = Phone or Modem, CSC = CSC.

How To Update Samsung SM-G730A Galaxy S3 Mini AT&T Firmware Version - Full Firmware Package

This Guide will show you the right method to update the Software version of Samsung Galaxy S3 Mini SM-G730A from AT&T, All you need to do is reading the complete guide first, Then downloading the needed files and programs, Prepare the needed tools, After that you can start applying the guide's steps one by one.

In this guide we will use a full firmware package, But you can follow the same steps to update your Samsung SM-G730A Galaxy S3 Mini device via one file update package too, We put a notice at the end of this guide to show you how.

What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung SM-G730A Galaxy S3 Mini Firmware:
- Samsung SM-G730A Galaxy S3 Mini Stock Firmware Package.
- Odin3 Flasher.
- Samsung USB Drivers.

Needed Tools For Updating Samsung SM-G730A Galaxy S3 Mini Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that you are doing this at your own RISK, You can use OTA or Samsung Kies update methods instead of this manual update in case you are afraid of killing your device.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung SM-G730A Galaxy S3 Mini Firmware Update Steps:

- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: signed_GOLDENLTE_8G_ATT_130613.pit

- Firmware files selection:

Click Bootloader button to select: BOOTLOADER_G730Axxxxxxx_..._user_low_ship.tar.md5
Click PDA button to select: PLATFORM_G730Axxxxxxx_1299773_REV00_user_low_ship.tar.md5
Click PHONE button to select: MODEM_G730Axxxxxxx_1299773_REV00_user_low_ship.tar.md5
Click CSC button to select: CSC_ATT_G730AATTxxxx_1299773_REV00_user_low_ship.tar.md5

- Put the device into Download Mode, Read this Guide to learn how.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notices:
- When you get one big file inside the firmware package, Then it should be selected as a PDA file only, And do not check Re-Partition option or use PIT file at all.

- You can update your device firmware version without using any PIT file too, So use the PIT file only if you need to fix your device partitions.

- In new Odin3 flasher versions you will get BL, AP, CP, CSC instead of the old versions button's name, So BL = Bootloader, CP = PDA, CP = Phone or Modem, CSC = CSC.

JailBreak Tutorial For iPhone 3Gs - 4G - iPod Touch 3G - 4G

This Guide will help you to Update the software (Firmware) version of your Samsung SM-T520 Galaxy Tab Pro 10.1, In this guide we will teach you the manual upgrade method, Use this method when you can't update your device via OTA update or by Samsung Kies.

In this guide we will use a full firmware package, Which may contain 4 or 3 files in addition to a Pit file, And we make a notice at the end of this guide about how to update your device using one file firmware package.


What we should do before performing the update:
- First of all you should know your current device firmware version, Write it down so in case something goes wrong it will help you to fix your device.
- Check that you got the suitable firmware package for your device, And make sure to get it from trusted sources only.
- Check your device's battery level to be at least at 90%, Otherwise charge it before starting the update process.
- Make sure to backup any saved data into your device, Like contacts, messages...etc.

Needed Downloads For Updating Samsung Galaxy Tab Pro 10.1 SM-T520 Firmware:
- Samsung Galaxy Tab Pro 10.1 SM-T520 Stock Firmware Package.
- Odin3 Flasher.
- Samsung Galaxy Tab Pro 10.1 SM-T520 USB Drivers.

Needed Tools For Updating Samsung Galaxy Tab Pro 10.1 SM-T520 Firmware:
- Suitable USB cable.
- A stable computer running Windows OS.

Important Notice: We provide this guide for help purpose only, And we hold no responsibility at all, So keep in mind that your are doing this at your own RISK.

Preparation:
After downloading the needed files you should extract the zipped ones, And install the USB drivers (Restart your PC after installing).


Samsung Galaxy Tab Pro 10.1 SM-T520 Firmware Update Steps:

- Turn off the device.

- Run Odin3.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: PICASSOWIFI_EUR_OPEN.pit

- Firmware files selection:

Click BL button to select: BL_T520xxxxxxx_447712_REV00_user_low_ship.tar.md5
Click AP button to select: AP_T520xxxxxxx_447712_REV00_user_low_ship.tar.md5
Click CSC button to select: CSC_xxx_T520xxxxxxx_..._REV00_user_low_ship.tar.md5

- Put the device into Download Mode, Read this Guide to learn how.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Notices:
- When you get one big file inside the firmware package, Then it should be selected as a AP file only, And do not check Re-Partition option or use PIT file at all.

- You can update your device firmware version without using any PIT file too, So use the PIT file only if you need to fix your device partitions.

All About Samsung Android Root ( complete Guide and Detail )

How to

1. Power on Mobile in Download Mode ( Vol Down + Home + power On. if it asks you to press a button to continue, press the listed button, or run adb reboot download command )
2. Install Samsung Drivers ,
3. Open Odin ( latest version Preferd ) here Download
4. Select Root File in " PDA " and Press " Start "
5. Wait for Android to boot
6. Done (if it took you more than 30 seconds, you need practise!)

we will update this Thread With Root image Files , u also can request here for Root Image if not Found around or uper link not help u

SGH-I747: CF-Auto-Root-d2att-d2uc-samsungsghi747.zip

SGH-I747M: CF-Auto-Root-d2can-d2vl-sghi747m.zip

SIII 4.1.2 : CF-Root-SGS3-v6.4.zip

PARTICULAR MODELS:

Rooting Galaxy Ace i8160 :

Before you begin rooting you must keep this in mind that “Rooting will void your warranty”


Important note: Do not disturb the process i.e remove the battery etc.

Important Note: Make sure that battery is at least 85% as preventive measures

Instruction:

1) Download and install SAMSUNG USB Drivers for Mobile Phones
(You may install Samsung KIES for this) – LINK

2) Copy update_su.zip to internal sdcard.

3) Switch off the phone and enter to download mode (“Vol Down + Home + Power”).
Wait until the driver will be installed and Odin will recognize the phone!

4) Flash I8160XXLD8_ready_to_root_ANT.tar.md5 using Odin as PDA part.
(Original : I8160XXLD8_original.tar.md5)

5) Turn off the phone again and enter to recovery mode (“Vol Up + Home + Power”).

6) Select “apply update from sdcard” and choose update_su.zip file

7) Reboot the phone

8) Rooting Successful
(Thanks To Xda)

Galaxy S5 ROOT ALL VERSIONS!

all S5 root files

SM-G900i - Oceania 

SM-G900H - International Exynos 

SM-G900W8 - Canadian mode

SM-G900M - Model for Middle East and South America

SM-G900F - International Snapdragon

SM-G900T1 - MetroPCS

SM-G900P - Sprint

SM-G900T - T-Mobile United States

Galaxy S5 (SM-G900RT) - US Cellular

SM-G900L - Korean model

exam how root G900M
pic1
http://www.mediafire.com/convkey/74b...em8e6nhtfg.jpg
pic2
http://www.mediafire.com/convkey/735...099a7fbyfg.jpg

all files are re-uploaded, if you see any mistakes please let me know

SAMSUNG S3(I9300)&GALAXY NOTE 2(N7100)Boot Reapir

Dear Friends This Models(i9300&N7100) Boot Repair Step One i Already Posted Plz Check This Link
IF YOU WANT MAKE A SAMSUNG S3(i9300)BOOT CARD(LOOK HERE)
1)First Create Boot Card
2)Download teraterm-4.78
teraterm-4.78
3)Connect Spt Box Also Take One Micro Uart Cable
4)Open teraterm-4.78 (look the picture)

4)Open teraterm-4.78 (look the picture)

Go To Device Manager Check Spt Port Number
Open teraterm-4.78,Now New Window Apper.
Select Spt Serial Port (look the picture)

After Select The Serial Port Press Ok Button
Next Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button


Insert Boot Card To Phone
Connect Spt Via Uart Cable
Then Insert Battery Next Hold Power Button Wait For Minutes

Quote:

pit_check_integrity: invalid pit.(0x0) pit_check_integrity: invalid pit.(0x0) update_guid_partition_table: There is no pit binary. fsd_reclaim 1283: MST is not recognized(mst.magic=0x0) fsd_reclaim 1284: MST is not recognized fsd_reclaim 1599: Error(nErr=0x0) fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB) j4fs_open 153: Error(nErr=0x40000000) j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: 'param.j4fs' does not exist, make new one.. j4fs_write_file_bootloader 184: j4fs panic fail j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: debug level file does not exist..*INCORRECT!* init_fuel_gauge: battery is not detected, do not init fuelgauge init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL2:0x3b init_microusb_ic: MUIC: CONTROL2:0x3a PMIC_ID = 0x2 PMIC_IRQSRC = 0x0 PMIC_STATUS1 = 0x10 PMIC_STATUS2 = 0x0 PMIC_PWRON = 0x2 PMIC_IRQ1 = 0x27 PMIC_IRQ2 = 0x0 s5p_check_keypad: keypad value=0x0 s5p_check_reboot_mode: INFORM3 = 0 ... skip s5p_check_upload: MAGIC CODE=d1b0f038 microusb_get_attached_device: STATUS1:0x3c, 2:0x0 s5p_check_download: update mode=0 j4fs_read_file_bootloader 355: j4fs panic s5p_check_tzsw: invalid tzsw type! dummy? scr_draw_image: draw 'download_error.jpg'... j4fs_read_file_bootloader 355: j4fs panic read_param_file: 'download_error.jpg' j4fs read failed! fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600 a2, 60, 90,

After The Boot Repair Phone Must Trun On But Just For Light Nothing Show The Display.Dont Worry Put The Phone Download Mode Now Phone Enter Download Like This Picture


open spt software use any version flash file.but remmber must use repartition option then flash it
are you used odin software must use mx pit file&repartition option
after the flash phone must powered but imei is damaged just rebuild imei via z3x.

Quote:

TN default <OK> <OK> [DVFS] INT(1) : 0 DRAM Type : LPDDR2 8G [DVFS] MIF(3) : 0 [EPLL][VPLL][CLK_DIV] OK <OK> [LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0 [DVFS] ARM(0) : 5 [DVFS] INT(1) : 0 [DVFS] G3D(2) : 0 [DVFS] MIF(3) : 0 [SD_INIT SDMMC_HighSpeedONE] SD_READ: 20000 20000 0x40008000 -> 668484 usec <OK> Inp32(uAddr) : 0xea00007e FW Booting [Patch Stop] This is not Rom Code.

any one faced the error while boot repair
this casue not software bad EMMC
this phone cant repair with any jtag,must change the EMMC

THIS SOLUTION FROM SAMSUNG OFFICIAL TEAM

How To Fix Samsung Galaxy S5 SM-G900F Dead Boot Problem | Boot Recovery Guide

This Guide will help you to fix your Dead Boot Samsung Galaxy S5 SM-G900F device, The dead boot problem may happen to anyone and because of many reasons, But that is not important, The most important thing is to know how you can revive the Dead Galaxy S5 SM-G900F and bring it to work again, In this guide we will show you the easiest way to perform the this repair operation by yourself.

There's no need for any special or expensive tools to fix the dead Galaxy S5 SM-G900F device, You have to repair and get the following:

- Working Samsung Galaxy S5 SM-G900F mobile phone.

- Odin3 Flasher.

- 4GB SDHC MicroSD card.

- MSM8974PRO_boot_recovery.pit

- Normal Bootloader file: BL_G900Fxxxxxxxx_...tar

Samsung Galaxy S5 SM-G900F Dead Boot Repair Steps:

- Run Odin3.exe flasher.

- Click on PIT button and select: MSM8974PRO_boot_recovery.pit

- Click on BL button and select: BL_G900Fxxxxxxxx_...tar

- Check T Flash option at Odin3 flasher.

- Insert the microSD card inside a working Galaxy S5 SM-G900F mobile phone.

- Put the working Galaxy S5 SM-G900F mobile phone into Download Mode, Read this Guide for help.

- Connect the GS5 mobile phone to the computer using the USB cable.

- When Odin3 flasher detects the device, Click on Start button.

- After Odin3 do his job, You will get the PIT and Bootloader files on the microSD card.

- Remove the microSD card from the working GS5 and insert it inside the Dead Galaxy S5 mobile phone.

- Press and Hold the Volume Down key + Home key + Power key.

- If the recovery process completed successfully, You will get the dead Galaxy S5 device into Download Mode.

- Now you have to flash your device with full firmware package, Pit, Bootloader, AP, CP, And CSC files.

How To Hard Reset | Factory Reset Samsung Galaxy Tab 3 8.0 T310 | T311 | T315

This guide will teach you the right steps to perform the Hard Reset operation on your Samsung Galaxy Tab 3 8.0, The same steps can be used to factory reset all Galaxy Tab 3 8.0 variants SM-T310, SM-T311, And SM-T315 too.

Keep in mind that formatting your device will erase all your personal data like messages, Contacts, Photos, Installed applications, Notes...etc., Everything you saved on the device internal memory will be lost forever, So make sure to backup and save any wanted data to an external storage like external memory card, SIM card, Or PC.

The Hard Reset / Factory Reset operation can fix many software related errors and problems:

- After installing bad or unsupported application into your Samsung mobile phone, Which causes your phone to be frozen.

- Your Samsung mobile phone doesn't respond to any order after booting because of any software errors.

- Forgotten pattern lock in Samsung Android mobile phones.

- Forgotten user code.

- Forgotten phone code.

- Before or after installing a new firmware update into your device.

- Before selling the device, To Wipe all your saved personal data.

Before performing the Hard Reset:

- In case your Samsung mobile phone can connect to a computer, Then it is better to make a backup of your saved data using Samsung kies software, You can read this Guide to learn how.

- But in case that is not possible, Then you can check that your phone's battery has enough charging level, Otherwise you should charge it.

Samsung Galaxy Tab 3 8.0 T310 | T311 | T315 Hard Reset Steps:

- Turn your device off.

- Take out any existed SIM or memory card.

- Wait for 10 seconds.

- Press and hold the Volume Up key then press the Power key.

- Keep pressing the Volume Up key until Samsung logo appears,Then release The Power Key only.

- Keep pressing The Volume Up Key until you get Factory reset / System Recovery menu on screen.

- Use the Volume Down key to select Wipe Data / Factory Reset option.

- Use the Power key to confirm the operation.

- You need to use the Volume Down key again to select "Yes -- delete all user data"

- Use the Power key to confirm.

- After performing the hard reset, Select Reboot System Now option, And confirm it using the Power key.

- Now the phone will reboots, Wait for it to be fully on and then you can start using it.

Notice: The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.