How To Update Samsung N5110 Galaxy Note 8.0 Wi-Fi Firmware Using Odin Flasher and Stock Firmware Package

This Guide will teach you: How you can update the firmware version of your N5110 Galaxy Note 8.0 Wi-Fi to any wanted version, We used simple and clear steps that you can follow one by one to perform the update by yourself, No need to buy any special tool or program to update the device, You will get all you need for Free at this guide.

Preparing:

- Make a backup of your Samsung N5110 Galaxy Note 8.0 Wi-Fi data, Read our online guide to learn how to do it.
- Charge your phone's battery to be at least at 90%.
- Write Down your device current firmware version, It could be very helpful when something goes wrong.

Downloads:

- Stock Firmware Package for Samsung N5110 Galaxy Note 8.0 Wi-Fi (Download and Extract).
- Odin Flasher.
- USB Drivers for Samsung N5110 (Download and install, Then restart the computer).

Tools:

- Suitable USB cable for Samsung N5110.
- A computer with Windows OS installed.

Samsung N5110 Galaxy Note 8.0 Wi-Fi Firmware Update Steps:

- Turn off the phone.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: kona_wifi.pit

- From the extracted firmware package you have to select the files in the following order:

Click Bootloader button to select: BOOTLOADER_N5110xxxxxx_REV00_...noship.tar.md5
Click PDA button to select: CODE_N5110xxxxxx_..._REV00_user_low_noship.tar.md5
Click CSC button to select: CSC_Oxx_N5110Oxxxxxx_....._user_low_noship.tar.md5

- Put your Samsung N5110 into Download Mode:

Press and Hold Volume Down key + Power key for 5 seconds, And after you see the warning message release both keys and press Volume Up key to be into Download Mode.

- Use the USB cable to connect your mobile to Computer.

- Wait until Windows detects the phone and installs the needed drivers for it.

- If Odin detects the connected device correctly you will see its COM port number (0:[COMxx]).

- Click on Start button.

- Odin will start to update your phone using the selected firmware files.

- The phone will be rebooted after the update.

- If the update was successful you will see PASS! Word at Odin's window.

- Disconnect the USB cable from phone.

- When the phone is fully on check the new firmware version by this Code *#1234#.

- It is better to perform a full reset by this code *2767*3855#

- Wait for your device to reboot one more time.

- When the phone is one again it will be up to date with the latest firmware version, So enjoy your work.

Notice:

- In case you have one big file inside the firmware package then no need to use any PIT file or to check Re-Partition option, And the one big file should be selected as PDA file.