How To Update Samsung S5303 Galaxy Y Plus Firmware Version - Manual Update Guide

This Guide will teach you: How to update your Samsung S5303 Galaxy Y Plus firmware version to any new released version, You will learn how you can use Odin flasher and Stock firmware package to perform the update by yourself, The needed tools are available too, As you need a suitable USB cable and a computer running Windows OS.

Preparing:

- Make a backup of your Samsung S5303 Galaxy Y Plus data, Read our online guide to learn how to do it.
- Charge your phone's battery to be at least at 90%.
- Write Down your device current firmware version, It could be very helpful when something goes wrong.

Downloads:

- Stock Firmware Package for Samsung S5303 Galaxy Y Plus (Download and Extract).
- Odin Flasher.
- USB Drivers for Samsung S5303 (Download and install, Then restart the computer).

Tools:

- Suitable USB cable for Samsung S5303.
- A computer with Windows OS installed.

Samsung S5303 Galaxy Y Plus Firmware Update Steps:

- Turn off the phone.

- Take out the SIM card and memory too.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: coriplusds_signed.pit

- From the extracted firmware package you have to select the files in the following order:

Click Bootloader button to select: BOOT_S5303xxxxxx_REV00.tar.md5

Click PDA button to select: CODE_S5303xxxxxx_..._REV00_user_low_ship.tar.md5

Click Phone button to select: MODEM_S5303xxxxxx_REV00.tar.md5

Click CSC button to select: CSC_Oxx_S5303Oxxxxxx_....._user_low_ship.tar.md5

- Put your Samsung S5303 into Download Mode:

Press and Hold Volume Down key + Home + Power key

- Use the USB cable to connect your mobile to Computer.

- Wait until Windows detects the phone and installs the needed drivers for it.

- If Odin detects the connected device correctly you will see its COM port number (0:[COMxx]).

- Click on Start button.

- Odin will start to update your phone using the selected firmware files.

- The phone will be rebooted after the update.

- If the update was successful you will see PASS! Word at Odin's window.

- Disconnect the USB cable from phone.

- When the phone is fully on check the new firmware version by this Code *#1234#.

- Now your device is up to date with the latest firmware version, So enjoy your work.

Notice:
- In case you have one big file inside the firmware package then no need to use any PIT file or to check Re-Partition option, And the one big file should be selected as PDA file.

- In case the device hangs at Samsung logo after rebooting, You can Hard Reset it (How To Hard Reset Samsung S5303 Galaxy Y Plus).