Friday, May 16, 2014

How To Update Samsung E2130 Guru Firmware By NSpro Box

Cable to Use: NSpro C450 cable.
Battery: Must be into the phone,and the phone OFF.

Firmware Update Steps:
  1. Run NSpro Software and select E2130 model then click Next
  2. Click Flash.
  3. Set Baudrate: 921600
  4. Set Mode: Bin & TFS
  5. For BIN File select: E2130xxxxx.cla
  6. For TFS File select: E2130xxxxx.tfs
  7. Click Write and connect C450 cable to Off phone with battery inside to start the process.
  8. Wait till all is done then disconnect cable.
  9. Turn on the phone and do full reset: *2767*3855#


Disclaimer. These Images Are Uploaded MobileAdOns For Teaching And Study Purpose.

you are taking the complete Responsibility to use them, So in case you are not sure what or how to use do not use any.

So We Will Not Be Responsible For Any Damage In Your Mobile, It Is Your Responsibility To Use These Method.